USB software 4.0.0 Release

Release note:

All new designed architecture from the ground-up, XR10 PRO ESC requires a new USB software 4.0.0. Due to several technical advancement made to both the hardware and software, The new software 4.0.0 can be only installed on the multifunction LCD program box and WiFi express (soon to be released).

LCD program box
http://www.hobbywingdirect.com/products/lcd-program

Note: the firmware of the LCD program box also needs to be updated through the software once installed.

Download

You can download the latest software from HOBBYWING North America download page here. http://www.hobbywingdirect.com/pages/download

Description of Hobbywing USB Link V4.0.0

for CAR ESC Firmware:

1. Released new firmware “XR-4.1.05” for XR10 Pro ESC.
2. Released two version of new firmware “XR-4.1.62" & "XR-4.2.01” for XR8-Plus ESC. Firmware “XR-4.0.62” solved the motor noise issue during the low-speed start-up process in Sensored/Sensorless Hybrid mode. Firmware “XR-4.2.01” allows the ESC to use the Full-sensored mode and also the Turbo function in Full-sensored mode.

for Aircraft ESC Firmware:

1. Added the new firmware “PL-04.0.03” (for Platinum V4 60A), which support to have the speed-governing function via VBAR.
2. Added the new firmware “PL-04.0.02” (for Platinum V4 80A), which support to have the speed-governing function via VBAR.
3. Added the new firmware “PL-04.0.02” (for Platinum V4 120A), which support to have the speed-governing function via VBAR.
4. Added the new firmware “PL-04.0.01” (for Platinum HV V4 130A), which support to have the speed-governing function via VBAR.
5. Added the new firmware “PL_OPTO-04.0.01” (for Platinum HV V4 130A OPTO), which support to have the speed-governing function via VBAR.

for LCD Firmware:

1. Revised the firmware of the 3-in-1/multifunction LCD program box to support the ESC programming of EZRUN MAX10.
2. Fixed the display issue after connected the XR8 ESC to a LCD program box for ESC programming.